SAIGA Shotguns
SAIGA Parts
SAIGA Service Tips

Tromix Fakes..!

Testimonials Page

Tromix PRjECTs

Tromix shotgun conversions transform your ordinary hunting gun into a more dynamic tactical tool. The Basic Fixed stock conversion consists of the following:

1. SAW pistol grip installed

2. Rear of receiver re-machined to the correct angle.

3. Receiver back-plate Tig welded in place.

4. Safety selector stop welded in place.

5. Tromix trigger guard welded in place.

6. Left over trigger axis pins welded up.

7. U.S. fire control components installed.

8. Gas block aligned as-required.

9. Install Fixed Tromix or Ace stock.

10. Mod magwell for 8/10rd magazines.

11. Tune Extractor and Extractor Bbl Relief.

12. Sand blast with aluminum oxide media.

13. Refinish with black bake-on Norrell Moly Resin.

This Basic Fixed stock conversion runs $395 on the customer supplied gun. Add $65 for folding stock mechanism.  If you also need your barrel cut down, gas ports opened up, and muzzle rethreaded, add $95. We can cut your barrel to 16.5", enlarge the gas ports and permanently affix a flash hider or shark brake. However, in this configuration, some guns may not cycle light target ammunition and will require more frequent cleaning due to having larger gas ports.
If you need Tromix to provide the base-gun for work, add $550. Availability of complete guns is extremely limited. All pricing shown below for models S-O1 through S17 include the base gun. NOTE: HK sights are used, as-removed from G3 battle rifles. Some wear may be present.

In addition to the Basic Fixed stock conversion outlined above, the entire gas system is relocated rearward 4" in order to allow the gun to still cycle low base target ammunition. The Basic Folding stock SBS conversion runs $850 on the customer supplied gun. Add $550 if Tromix supplies the base gun. Availability is extremely limited.

Looking for 10 round magazines to feed your Tromix Saiga-12..?

( http://www.mississippiautoarms.com )

 

Saiga Videos!
Hair by Tromix	Jug Hunting
Semi-auto Saiga-12! (2.7MB.mpg)	Saiga-12 Full Auto video (1MB .wmv)

Click on the images for a larger view for any of these...

#S19-Tromix Saiga 12ga Basic Fixed Stock Saiga-19" Priced at: $945 Add Available Options: - “Cut 22” barrel to 19” and rethread $95 - Folding Stock Mechanism $65 - Tromix Shark Brake $85 - Tromix Flash Hider $85 - SRTrigger $85 - Ventilate OEM Hand guard $45

Click on the images for a larger view for any of these...

Kross Hellion HG Click for Larger View #S02-Tromix Saiga 12ga shown with Tromix handguard, HK sights (re-conditioned), 16.5" barrel, and permanently attached Shark Brake (18.2" OAL). Priced at: $1,420   (Note: Some 16.5" guns may not cycle light target ammunition) Add Available Options: - SRTrigger add $85 - Galil charging handle add $85 - XS Night Sights add $120 - Limbsaver recoil Pad add $75 - Kross Hellion Hand Guard $125 - Tromix Flash Hider N/C

Click on the images for a larger view for any of these...

Kross Hellion HG Click for Larger View #S06-Tromix Saiga 12ga Shown with Tromix folding stock, Galil charging handle, Galil handguard, 19" barrel, HK sights (re-conditioned), shark brake/breacher. Priced at: $1,420 (black only) Add Available Options: - SRTrigger add $85 - XS Night Sights add $120 - Limbsaver recoil pad add $75 - Kross Hellion Hand Guard $125 - Tromix Flash Hider N/C

Click on the images for a larger view for any of these...

Kross Hellion HG Click for Larger View #S17-Tromix Saiga 12ga Tromix folding stock, 8" barrel, HK sights (re-conditioned), Galil charging handle, and door breacher. Priced at:  $1,735 Add Available Options: - SRTrigger add $85 - XS Night Sights add $120 - Limbsaver recoil pad add $75 - Tromix Flash Hider N/C - Kross Hellion Hand Guard $125 - 10" Barrel add $100 - 12" Barrel Add $250 - 14" barrel add $250 Note – Individuals cannot own the S-17 shotgun in the following states. AL, CA, DE, HI, IL, IN, MA, NJ, NY, RI, WA. Kansas is no longer restricted.

Click on the images for a larger view for any of these...